BMW Repair Services in Huntsville, TX

Expert Maintenance and Repair Solutions at Figure Automotive

At Figure Automotive in Huntsville, TX, we specialize in comprehensive BMW repair and maintenance services, ensuring your vehicle performs at its best.

Problem with your BMW?
Request a call back.

Alfa Romeo Automotive Repair Services by Figure Automotive in Huntsville, TX
Audi Logo
BMW Logo
Fiat Logo
Jaguar Logo
Maserati Logo
Mercedes Benz Logo
Porsche Logo
Saab Logo
Volkswagen Logo
Volvo Logo
Land Rover Logo
Mini Cooper Logo

Comprehensive BMW Repair Services

At Figure Automotive, we offer a full range of repair services tailored to BMW vehicles. Our certified technicians utilize advanced diagnostic tools to address issues promptly and efficiently.

Regular maintenance is crucial for your Alfa Romeo’s longevity. We offer scheduled services, including oil and filter changes, brake inspections, and tire rotations, to keep your vehicle running smoothly.

  • Oil and Filter Change
    Regular oil changes keep the engine lubricated and running smoothly. BMW engines are precision-engineered, and fresh oil helps reduce wear on moving parts, improving performance and longevity.

  • Brake Pad and Rotor Inspection
    BMW brake systems are sensitive, and regular inspections of pads and rotors are essential to maintain braking efficiency and safety. Worn pads and rotors can reduce stopping power and cause further damage if not addressed.

  • Coolant System Check and Refill
    The coolant system regulates engine temperature to prevent overheating. Checking and refilling coolant ensures the engine stays within a safe temperature range, especially during hot or long drives.

  • Transmission Fluid Replacement
    Transmission fluid lubricates the transmission’s gears and components. Routine replacement prevents wear, overheating, and transmission issues, helping maintain smooth gear shifts.

  • Spark Plug Replacement
    Spark plugs ignite the air-fuel mixture in the engine, creating combustion. Worn spark plugs can lead to misfires, reduced fuel efficiency, and poor engine performance, so regular replacement is essential.

  • Battery Inspection and Testing
    BMWs often have advanced electrical systems, making battery health crucial. Regular inspections and testing help prevent sudden battery failure, ensuring the car starts and all electronics function properly.

  • Air Filter Replacement
    The air filter prevents debris from entering the engine. A clean filter promotes efficient airflow, which optimizes performance and fuel economy while reducing engine strain.

  • Cabin Air Filter Replacement
    The cabin air filter keeps dust, pollen, and pollutants out of the interior air. Regular replacement ensures clean air quality inside the vehicle and can improve airflow in the ventilation system.

  • Inspection of Belts and Hoses
    Belts and hoses are vital to the engine’s operation, powering systems like the alternator, power steering, and cooling. Regular inspection prevents wear and tear that could lead to breakdowns, leaks, or engine overheating.

Each of these services helps maintain BMW performance, safety, and efficiency, ensuring the vehicle remains in peak condition.

Our advanced diagnostic tools allow us to accurately identify and address any issues with your Alfa Romeo, ensuring efficient and effective repairs.

  • Engine Diagnostic Scanning
    Uses specialized tools to scan for error codes related to the engine’s performance, identifying issues like misfires, sensor failures, and fuel injection problems.

  • Transmission Diagnostic Testing
    Examines transmission performance and detects issues such as slipping gears, delayed shifts, or fluid pressure problems using advanced diagnostic software.

  • ABS and Traction Control System Analysis
    Diagnoses the Anti-lock Braking System (ABS) and traction control to detect issues with sensors, modules, or other components affecting braking and stability.

  • Fuel System Pressure Testing
    Measures fuel system pressure to ensure proper fuel flow to the engine, identifying problems with fuel pumps, injectors, or regulators that could affect performance.

  • Battery and Charging System Diagnostic
    Assesses the health of the battery, alternator, and overall charging system to detect issues causing power loss or electrical failures.

  • Electronic Control Unit (ECU) Diagnostics
    Tests the ECU for faults or programming issues, ensuring proper communication with other vehicle systems and optimal engine management.

  • Emissions System Analysis
    Checks components like the catalytic converter, oxygen sensors, and exhaust system to identify issues impacting emissions, efficiency, and compliance with regulations.

  • Climate Control System Diagnostic
    Analyzes the HVAC (Heating, Ventilation, and Air Conditioning) system for faults, including sensors, blower motors, and actuators, ensuring proper climate control inside the car.

  • Suspension and Steering Diagnostics
    Inspects suspension and steering components, including shocks, struts, and electronic steering sensors, to detect issues affecting handling and stability.

Whether it’s a minor engine tune-up or a complete transmission replacement, our skilled technicians have the expertise to handle complex repairs with precision.

  • Valve Cover Gasket Replacement
    The valve cover gasket often wears out in BMWs, leading to oil leaks. Replacing it prevents leaks that can damage other engine components.

  • Timing Chain Replacement
    BMW timing chains can experience stretching or wear over time, which affects engine timing and can cause severe damage if not addressed. Replacement ensures smooth engine operation.

  • Turbocharger Repair or Replacement
    Turbocharged BMW models may experience turbo wear or failure. Repairs or replacements restore power and efficiency, addressing issues like reduced acceleration and excessive exhaust smoke.

  • Fuel Injector Replacement
    BMW fuel injectors can clog or fail, causing misfires, rough idling, or poor fuel efficiency. Replacement ensures proper fuel delivery and smooth engine performance.

  • VANOS (Variable Valve Timing) Repair
    The BMW VANOS system controls valve timing for efficiency and performance. When VANOS seals or solenoids fail, it can cause rough idle or power loss, requiring repair or replacement.

  • High-Pressure Fuel Pump (HPFP) Replacement
    Common in BMWs, HPFP failure leads to fuel delivery issues, poor acceleration, or stalling. Replacement ensures consistent fuel pressure and engine performance.

  • Transmission Fluid Leak Repair
    BMWs are prone to transmission fluid leaks from seals or gaskets. Repairing leaks ensures proper lubrication and prevents overheating or transmission damage.

  • Clutch Replacement (Manual Transmissions)
    Clutches in manual BMWs can wear over time, causing slipping or poor engagement. Replacing the clutch restores smooth shifting and reliable power transfer.

  • Torque Converter Repair or Replacement
    Issues with the torque converter in automatic BMWs can lead to shuddering, slipping, or poor acceleration. Repairing or replacing it ensures efficient power transfer.

  • Cylinder Head Gasket Replacement
    The head gasket can fail in BMW engines, leading to overheating, coolant leaks, or white smoke from the exhaust. Replacing it prevents engine damage and maintains optimal compression.

We provide comprehensive suspension and brake services to ensure your Alfa Romeo delivers optimal performance and safety on the road.

  • Brake Pad Replacement
    BMW brake pads wear down over time and need regular replacement to maintain braking power and safety. High-quality pads help minimize rotor wear and enhance performance.

  • Rotor Resurfacing or Replacement
    Brake rotors can become warped or grooved over time. Resurfacing or replacing rotors ensures smooth, vibration-free braking and optimal stopping power.

  • Brake Fluid Flush
    Over time, brake fluid can absorb moisture, reducing braking efficiency. Regular fluid flushes maintain braking performance and protect system components from corrosion.

  • Control Arm Replacement
    BMW control arms wear out and cause suspension instability. Replacing them restores handling precision and improves steering response.

  • Strut and Shock Replacement
    BMW struts and shocks can lose effectiveness, resulting in a bumpy ride and poor handling. Replacing them improves ride comfort, stability, and road handling.

  • Ball Joint Replacement
    Ball joints connect suspension components and allow for smooth steering movement. Worn ball joints can cause clunking noises and poor alignment, requiring replacement for safe handling.

  • Sway Bar Link Replacement
    Sway bar links stabilize the vehicle during turns. Worn links cause excessive body roll and reduce stability. Replacement restores cornering and handling performance.

  • Brake Caliper Service or Replacement
    Stuck or leaking brake calipers affect braking performance and cause uneven pad wear. Caliper servicing or replacement ensures consistent braking force.

  • Suspension Bushing Replacement
    Bushings cushion the joints in the suspension system but wear over time, leading to noise and vibration. Replacing bushings improves ride quality and suspension stability.

Regular oil changes are vital for engine health. We use high-quality oil and filters to keep your Alfa Romeo’s engine running efficiently.

  • Synthetic Oil Change
    BMWs typically require synthetic oil, which provides better engine protection and lasts longer than conventional oil. Regular synthetic oil changes maintain engine performance and longevity.

  • Oil Filter Replacement
    The oil filter captures contaminants from the oil, protecting the engine. Replacing it during each oil change prevents debris from circulating through the engine.

  • Inspection of Oil Pan Gasket
    BMWs are prone to oil pan gasket leaks. During an oil change, the gasket is inspected to catch leaks early and prevent oil loss or damage to other engine components.

  • Drain Plug Replacement or Inspection
    The drain plug is removed and reinstalled with each oil change. It’s inspected or replaced to ensure a secure seal and prevent oil leaks.

  • Inspection of Valve Cover Gasket
    The valve cover gasket can often leak, especially in older BMWs. Inspecting it during an oil change helps identify leaks that can lead to oil loss and engine issues.

  • Oil Level Sensor Check
    BMWs have oil level sensors that alert drivers of low oil. During an oil change, this sensor is checked to ensure it accurately reads the oil level and functions properly.

  • Crankcase Ventilation (PCV) System Check
    The PCV system prevents oil buildup in the crankcase. It’s inspected during oil changes to prevent clogs that could lead to engine sludge or pressure issues.

  • Replacement of Oil Fill Cap Seal
    The oil fill cap seal can wear out, allowing oil to seep out. Replacing the seal during an oil change ensures the cap is airtight, preventing leaks and contamination.

  • Inspection of Oil Cooler Lines
    Some BMW models have oil coolers with lines that can develop leaks. Inspecting these lines helps identify potential issues with oil circulation and cooling.

  • Check and Reset Oil Service Indicator
    BMWs have an oil service indicator on the dashboard. After an oil change, this indicator is reset to track when the next service is due, ensuring timely maintenance.

Utilizing state-of-the-art diagnostic equipment, we accurately identify engine issues to provide effective repair solutions.

  • OBD-II Diagnostic Scan
    BMW’s onboard diagnostic system (OBD-II) detects and logs engine issues. Scanning it reveals error codes related to engine performance, emissions, and other components, helping technicians pinpoint issues quickly.

  • Cylinder Misfire Detection
    Misfires can occur due to ignition coil, spark plug, or fuel injector issues. This diagnostic service identifies which cylinder is misfiring, allowing targeted repairs for smoother engine operation.

  • VANOS System Diagnostics
    BMW’s VANOS (variable valve timing) system can experience issues that impact engine performance. Diagnostics on the VANOS system help identify problems with timing solenoids or seals that may cause rough idling or reduced power.

  • Fuel Injector Performance Testing
    Fuel injectors can become clogged or fail, affecting engine performance. This service tests the injectors for proper fuel delivery, ensuring efficient combustion and smooth engine operation.

  • Mass Air Flow (MAF) Sensor Testing
    The MAF sensor measures air intake for optimal fuel mixture. Testing it helps identify issues affecting fuel efficiency, engine power, and smooth acceleration.

  • Throttle Body Inspection and Testing
    BMW’s throttle body controls airflow into the engine. This diagnostic service inspects for clogs or electronic issues that could reduce engine performance or cause stalling.

  • Camshaft Position Sensor Testing
    Camshaft sensors help coordinate engine timing. Testing these sensors ensures accurate timing and prevents performance issues like rough idling or stalling.

  • Intake Manifold Pressure Testing
    This service measures pressure within the intake manifold to detect leaks or blockages that could disrupt air-fuel balance, leading to poor engine performance.

  • Crankshaft Position Sensor Diagnostic
    The crankshaft sensor monitors engine speed and position. Diagnosing this sensor ensures proper timing, smooth engine operation, and helps prevent stalling.

  • Exhaust Gas Recirculation (EGR) Valve Testing
    BMW’s EGR system reduces emissions by recirculating exhaust gases. Testing the EGR valve prevents emissions issues and maintains fuel efficiency, ensuring the engine runs cleaner.

Our battery services include testing and replacements to prevent unexpected breakdowns and ensure reliable vehicle operation.

  • Battery Health Check
    This test measures the battery’s remaining capacity and voltage to determine if it’s holding a charge. Regular health checks help prevent unexpected battery failures.

  • Battery Load Testing
    Load testing simulates the battery’s performance under a heavy load, identifying potential weaknesses or signs that the battery may need replacement.

  • Battery Registration
    When a new battery is installed in a BMW, it must be registered with the vehicle’s computer to ensure optimal charging and longevity. This process recalibrates the charging system to suit the new battery.

  • Alternator Performance Testing
    The alternator charges the battery while the engine is running. Testing ensures it’s delivering enough voltage, preventing undercharging or overcharging that could damage the battery.

  • Parasitic Draw Testing
    Parasitic draw can drain a battery when the car is off. This test detects excessive current draw from electronics, helping identify if electrical components are draining the battery prematurely.

  • Voltage Drop Test
    This test checks for voltage loss in the battery cables and connections, which can impact charging efficiency and cause slow starting. It ensures the battery receives and delivers proper voltage.

  • Inspection of Battery Terminals and Cables
    Over time, battery terminals and cables can corrode or loosen, impacting performance. Cleaning and tightening connections help ensure efficient power delivery.

  • Replacement with OEM or High-Quality Battery
    BMWs require specific batteries that support their advanced electrical systems. Replacing with an OEM or approved equivalent ensures compatibility and optimal performance.

  • Battery Insulation Installation
    Insulating the battery helps regulate temperature, extending battery life and performance, especially in extreme climates. Insulation services protect the battery from excessive heat or cold.

  • Resetting Battery-Related Error Codes
    After a battery replacement or service, error codes related to low battery voltage or charging may appear. Resetting these codes ensures the dashboard accurately reflects the battery’s current state.

Preventative Maintenance for Optimal Performance

Regular maintenance is crucial for your BMW’s longevity. We provide scheduled services, including oil changes, brake inspections, and fluid checks, to keep your vehicle running smoothly.

Genuine BMW Parts and Accessories

We prioritize genuine and OEM BMW parts when they’re cost-effective to ensure quality and compatibility. During the estimate process, customers will have the option to choose, allowing us to maintain your vehicle’s integrity and performance.

Customer-Centric Approach

At Figure Automotive, customer satisfaction is our priority. We offer transparent communication, detailed estimates, and timely service to meet your expectations.

Advanced Diagnostic Equipment

Our facility is equipped with state-of-the-art diagnostic tools, allowing us to accurately identify and resolve issues, minimizing downtime and ensuring precise repairs.

Certified Technicians

Our team comprises certified professionals with extensive experience in BMW repair and maintenance, ensuring your vehicle is in capable hands.

Convenient Scheduling Options

We offer flexible scheduling to accommodate your busy lifestyle. Contact us to arrange a service appointment at your convenience.

Warranty on Repairs

We stand by our work, offering warranties on parts and labor to provide peace of mind and confidence in our services.

Competitive Pricing

Our services are competitively priced, delivering exceptional value without compromising on quality.

Community Engagement

Figure Automotive actively participates in local events and supports community initiatives, reflecting our dedication to Huntsville, TX.

Popular BMW Models We Service

BMW X1

BMW X1

BMW M3 E92

BMW M3 E92

BMW 7-Series

BMW 7-Series

BMW 1-Series M Coupe

BMW 1-Series M

BMW 4-Series

BMW 4-Series

Customer Satisfaction is Our Top Priority

We understand the importance of trust in the automotive repair industry.

That’s why we’re dedicated to providing exceptional service and building long-term relationships with our clients.

Transparent Communication

We provide clear explanations of all necessary repairs and associated costs, ensuring you understand every service performed on your vehicle.

Timely Service

We prioritize efficient repairs, ensuring timely completion without ever compromising on quality.

Responsive Support

Our team is readily available to promptly answer your questions and address any concerns, ensuring you feel supported every step of the way.

Getting your BMW fixed is easy as 1 - 2 - 3

1.
Contact Us

Setup an appointment or drop on by our repair shop.

2.
Diagnose & Estimate

We'll diagnose your vehicles issue and give you an estimate on the repair costs.

3.
Vehicle Fixed

We'll get to work fixing your vehicle & call you the instant it's repaired.

Frequently Asked Questions

ABOUT BMW SERVICES

Common BMW repairs include oil leaks, cooling system failures, electrical malfunctions, and suspension component wear.

It’s recommended to service your BMW every 6,000 miles or six months, including oil changes and tire rotations.

We prioritize genuine and OEM BMW parts when they’re cost-effective to ensure quality and compatibility. During the estimate process, customers will have the option to choose, allowing us to maintain your vehicle’s integrity and performance.

Our technicians are certified professionals with extensive experience in BMW repair and maintenance.

Schedule a diagnostic appointment promptly to identify and address potential issues.

We provide warranties on parts and labor to ensure your peace of mind.

Yes, we offer convenient online scheduling options for your service appointments.

We accept various payment methods, including major credit cards and financing options.

We do not offer loaner vehicles.

You can reach us by phone, email, or through our website’s contact form.

Contact Figure Automotive Today

Contact us today to schedule an appointment or to learn more about how we can assist with your automotive needs.

Skip to content